Cart is empty
Questions? Call Toll-Free
1-855-362-9090
ANSI
Meets A156.13 Series 1000, Operational Grade 1.
Federal
Meets FF-H-106C, Series 86 and 87.
UL/ULC Positive Pressure
All locks listed for A Label and lesser class doors, 4" (122cm) x 10"
(305cm) single or 8" (244cm) x 10" (305cm) pair. Letter F and UL
symbol on armored front indicate listing. California State
Reference Code All levers with returns comply; levers return to
within 1/2" (13mm) of door face.
Handing – Handed; field reversible. The lockset can be re-handed
without disassembling the lock case.
Door Thickness – 1-3/4" (4mm) standard.
Backset – 2-3/4" (70mm).
Strike –Wrought brass, bronze or stainless steel. ANSI straight lip
standard.
Lockcase – Heavy gauge steel, with zinc dichromate finish for
corrosion resistance. 5-7/8" x 4" x 15/16".
Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4"
(32mm) x 3/32" (2mm). Accommodates flat doors and doors
beveled 1/8" (3mm) in 2" (51mm).
Faceplate –Wrought brass, bronze or stainless steel. Attached by
machine screws to lockcase front.
Latchbolt – Stainless steel, 2 piece mechanical with anti-friction
insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw.
Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8"
(10mm) effective auxiliary latch deadlocking.
Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4"
(32mm) x 1" (25mm) throw.
Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel
steel, 5/16" (8mm).
Spacing – Center to center, hub to cylinder: 3-5/8" (92mm).
Center to center, hub to turnpiece 2-7/16" (62 mm).f
without disassembling the lock case.
Door Thickness – 1-3/4" (4mm) standard.
Backset – 2-3/4" (70mm).
Strike –Wrought brass, bronze or stainless steel. ANSI straight lip
standard.
Lockcase – Heavy gauge steel, with zinc dichromate finish for
corrosion resistance. 5-7/8" x 4" x 15/16".
Armored Front – Heavy gauge steel, 8" (203 mm) x 1-1/4"
(32mm) x 3/32" (2mm). Accommodates flat doors and doors
beveled 1/8" (3mm) in 2" (51mm).
Faceplate –Wrought brass, bronze or stainless steel. Attached by
machine screws to lockcase front.
Latchbolt – Stainless steel, 2 piece mechanical with anti-friction
insert. 5/8" (16mm) x 1" (25mm) x 3/4" (19mm) throw.
Auxiliary Latchbolt – 9/16" (14mm) effective throw and 3/8"
(10mm) effective auxiliary latch deadlocking.
Deadbolt – One-piece stainless steel, 19/32" (15mm) x 1 1/4"
(32mm) x 1" (25mm) throw.
Hub – Knob: nickel steel, 5/16" (8mm) and 9/32". Lever: nickel
steel, 5/16" (8mm).
Spacing – Center to center, hub to cylinder: 3-5/8" (92mm).
Center to center, hub to turnpiece 2-7/16" (62 mm).f
Rixson Heavy Duty Offset Hung Floor Closer - L27
Price: $3,498.00
Low Dome Stop - FS01CU
Price: $11.00
Yale-5400LN - Non-Keyed Leverset - Exit Latch
Price: $335.00
Schlage AL-Series Keyed Exit Leverset
Price: $166.00
Yale Medallion Single Cylinder Deadbolt
Price: $60.00
|
